J & I MFG.
Now using a four stage, metal wash iron phosphate pre-treatment system. This operation cleans and pre-treats metal parts, applying a protective coating against corrosion. The iron phosphate pre-treatment provides a solid foundation for the subsequent paint operations.
Trained J& I paint applicators apply either a DTM (Direct to Metal) Imron coating designed to give you outstanding color and gloss retention along with excellent adhesion and flexibility, or the latest Dupont Hybrid Corlar epoxy primer, top coated, using Centari 5000, a high performance, two component, chemical and solvent resistant, high gloss acrylic urethane enamel.
The DMT coating is standard for the NS and OS models. The Hybrid Corlar coating process is standard on the Roughrider, Ranch Hand, and Forman models. Also available as an option on all other models.
All of these processes are backed by Dupont's comprehensive warranty, including 85% gloss retention over two years, a national network of Certified Repair Facilities, and over 550 field representatives committed to customer service and support.
MODEL OS
- 4" 5.4 LB. CHANNEL RUNNERS AND OUTER RAIL, EXTERIOR STAKE POCKETS & FORMED RUB RAIL WITH 4" REMOVABLE SIDE BOARDS.
- 1 1/2" X 3" X 14ga TUBING CROSS MEMBERS
- 1/8" TREAD PLATE FLOOR
- HEADACHE RACK WITH SUNSHADES & TWO OVAL STOP-TAIL-TURN SIGNAL SEAL BEAM LIGHTS.
- 15" TAIL SKIRT AND CHANNEL DROP HITCH WITH DOUBLE FORMED 1/4" PLATE
- TRIPLE FORMED 1/4" PLATE GOOSENECK BOX FOR 3/4" BOTTOM PLATE THICKNESS
- RECESSED CLEARANCE LIGHTS
- RECESSED LICENSE PLATE BOX
- PRIMER AND BLACK PAINT TOP COAT
- STANDARD FRAME 34" OR 38" / OPTIONAL 42" FRAME
MODEL NS
- 4" 5.4LB. CHANNEL RUNNERS
- 1 1/2" X 3" X 14ga TUBING CROSS MEMBERS
- 1/8" TREAD PLATE FLOOR
- 10ga FORMED OUTER RAIL WITH SPRING LOADED GAS FILL DOORS, INSET STAKE POCKETS AND 4" REMOVABLE SIDE BOARDS.
- HEADACHE RACK WITH SUNSHADES & TWO OVAL STOP-TAIL-TURN SIGNAL SEAL BEAM LIGHTS.
- 15" TAIL SKIRT AND CHANNEL DROP HITCH WITH DOUBLE FORMED 1/4" PLATE
- TRIPLE FORMED 1/4" PLATE GOOSENECK BOX FOR 3/4" BOTTOM PLATE THICKNESS
- RECESSED CLEARANCE LIGHTS
- RECESSED LICENSE PLATE BOX
- PRIMER AND BLACK PAINT TOP COAT
- STANDARD FRAME 34" OR 38" / OPTIONAL 42" FRAME
FIELD SERVICE / OILFIELD
- 4" 5.4LB. CHANNEL RUNNERS AND OUTER RAILS
- 3" X 4.1LB. CHANNEL CROSS MEMBERS
- 1/8" TREAD PLATE FLOOR
- REINFORCED REAR HITCH
- REINFORCED GOOSENECK BOX
- 2 7/8" PIPE GIN POLES
- A-FRAME
- 5 1/2" PIPE ROLLER WITH SEALED BEARINGS
- TOGGLE BLOCK FOR SNATCH BLOCK
- 2 X 2 11ga TUBE HEADACHE RACK WITH TOP HALF EXPANDED METAL AND BOTTOM
HALF 1/8" TREAD PLATE.
- GIN POLE TROUGHS ARE OPTIONAL
PLATFORM / STAKE SIDE
- 4" 5.4LB. CHANNEL RUNNERS AND OUTER RAILS
- STAKE POCKETS AND RUB RAILS
- 1 1/2" X 3" X 16ga CHANNEL CROSS MEMBERS
- 2" SQUARE HEADACHE RACK - TOP HALF SHADES
- BOTTOM HALF 16ga SOLID
- 42" STAKE SIDES & REAR BOARDS USING 1 1/2 X 3 14ga TUBING STAKE AND 6" SLATS.
-7" TAIL SECTION
- PRIMER AND BLACK FINNISH COAT
- RECESSED CLEARANCE LIGHTS
MODEL SE
- 4" CHANNEL RUNNERS
- 1 1/2" X 3" CROSS MEMBERS
- 10ga TREAD PLATE FLOOR
- 4" CHANNEL OUTSIDE RAIL
- 2" X 2" OPEN HEADACHE RACK
- DUPONT DTM IMRON PAINT COATING
WELDING FEED
- 34" WIDE 4" DROPPED FLOOR FOR WELDING OR FEED EQUIPMENT
- 10ga SMOOTH STEEL PLATE FLOOR AND SIDES
- RECESSED CLEARANCE LIGHTS AND LICENSE PLATE BOX
- WESTERN TAIL SECTION 3/16" & 1/4" SMOOTH STEEL PLATE
- 2" FENDER FLARE
- DUPONT CORLAR EPOXY PRIMER COATING
- RECEIVER IN REAR HITCH WITH SAFETY CHAIN HOLDERS
RANCH HAND
- 4" 5.4LB. CHANNEL RUNNERS
- 1 1/2" X 3" X 14ga TUBING CROSS MEMBERS
- 1/8" TREAD PLATE FLOOR
- 10ga SMOOTH STEEL SIDES WITH RADIUS ROLL 2" FENDERS AND STEP UP RUNNING BOARDS
- EXTERIOR STAKE POCKETS AND RUB RAIL WITH 4" REMOVABLE STAKE SIDE BOARDS
- STANDARD GOOSENECK BOX
- ROUNDED CORNER WESTERN RACK WITH SHADES AND FOUR ROUND SEALED LIGHTS
- RECESSED CLEARANCE LIGHTS
- WESTERN TAIL SECTION USING 3/16" AND 1/4" SMOOTH PLATE STEEL, RECESSED LIGHT BOXES
WITH FOUR ROUND SEAL BEAM LIGHTS AND REAR HITCH WITH STANDARD HEIGHT OR
OPTIONAL 4" DROP FOR TALL PROFILE TRUCK.
- ALUMINUM TREAD SCUFF PLATES IN ALL STEP UP AREAS
- TWO RECESSED TOOL BOXES
- FULLY WELDED SEAMS
- TWO-PART EPOXY PRIMER AND TWO-PART POLYURETHANE PAINT
FIRE BED
- BASIC NS BED WITHOUT GOOSENECK BOX
OPTIONS: -OPTIONAL FRONT STEP-IN BOXES WITH GATES AND EXPANDED METAL IN BOTTOM OF BOX.
-REAR 18" STEP BUMPER WITH HAND RAIL
ROUGH RIDER
- 4" 5.4LB. CHANNEL RUNNERS
- 1 1/2" X 3" X 14ga TUBING CROSS MEMBERS
- 1/8" TREAD PLATE FLOOR
- 10ga SMOOTH STEEL SIDES WITH RADIUS ROLL 2" FENDERS AND STEP UP RUNNING BOARDS
- ROUNDED CORNER WESTERN RACK WITH FOUR ROUND SEALED BEAM LIGHTS
- RECESSED CLEARANCE LIGHTS
- GOOSENECK TROUGH AND DOVE TAIL
- TWO RECESSED TOOL BOXES
- WESTERN TAIL SECTION WITH FOUR ROUND SEAL BEAM LIGHTS AND ALUMINUM TREAD SCUFF PLATES
- FULLY WELDED SEAMS
- TWO-PART EPOXY PRIMER - COLOR OPTIONAL
BALE BED
- THE J & I BALE BED OPTION CAN BE ADDED TO ANY BED WITH SOME ALTERATIONS HAVING THE ADDITION OF A SET OF HARDENED BALE SUPER SPEARS.
THE BALE BED COMES WITH A TWO-WAY ELECTRIC OVER HYDRAULIC PUMP TO POWER TWO 3" X 10" HYDRAULIC CYLINDERS. INCLUDED ARE ALL HYDRAULIC FITTINGS AND HOSES, ALL ELECTRIC LINES AND A 150 AMP CIRCUIT BREAKER.
- WE RECOMMEND THAT THE PUMP BE MOUNTED IN AN ENCLOSED TOOL BOX (NOT INCLUDED).
- THE SPEARS WILL GO DOWN PAST LEVEL FOR EASE OF BALE SPEARING AND PAST STRAIGHT VERTICAL TO SET THE BALE UP OVER THE BODY.
- THE REAR HITCH IS STRAIGHT DOWN WITH THE TAIL SECTION TO ALLOW THE BALE TO BE FULLY SPEARED.
- BALE SPEARS CAN BE REMOVED AND STORED BENEATH THE BED IN A 2" X 4" SPEAR HOLDER WHEN PULLING A GOOSENECK TRAILER.
FOREMAN
- 4" 5.4LB. CHANNEL RUNNERS
- 1 1/2" X 3" X 14ga TUBING CROSS MEMBERS
- 1/8" TREAD PLATE FLOOR
- 10ga SMOOTH STEEL SIDES WITH RADIUS ROLL 2" FENDERS AND STEP UP RUNNING BOARDS
- WESTERN RACK WITH FOUR ROUNDS SEALED BEAM LIGHTS
- STANDARD J & I GOOSENECK BOX
- TWO TALL BEHIND CAB TOOL BOXES WITH SIDE OPENINGS
- TWO UNDERBODY TOOL BOXES IN FRONT OF TIRES
- TWO TOP-OPENING 5' OR 7' SIDE BOXES ON TOP OF THE BED
- FOUR D-RING TIE DOWNS
- REMOVABLE VISE MOUNT
- FULLY WELDED SEAMS
- TWO-PART EPOXY PRIMER AND TWO-PART POLYURETHANE BLACK TOP COAT